Backup And Restore; Snmp Configuration And Reporting Commands - SMC Networks ELITECONNECT SMC2502W User Manual

Manually set the current local date and time.
This command also disables the NTP service if it was enabled
show time
Shows the current date and time, configured time zone and NTP servers.
set ntp on | off
Enable and disable the NTP service.
B.9

Backup and Restore

create backup
Create a backup.
store backup url [filename ]
Store a backup on another system.
get backup url
Retrieve a stored backup from another system.
restore backup
Restore a retrieved backup.
cancel backup
Cancel a running store backup or get backup task.
show backup
Display information about the list of local backup and the status of a running
store backup or get backup task.
B.10

SNMP Configuration and Reporting Commands

Note:
SMC EliteConnect WLAN Security System User Manual supports MIB 2-compliant MIB
objects.
B-12
The current date in
date
The current time in
time
The URL encoded location to store the backup. The
url
host must be an FTP server.
The destination filename for the backup image. The
filename
default is smc-
The URL encoded location to store the backup. The
url
host must be an FTP server.
format
yyyy/mm/dd
format.
h24:mm
yyyy-mm-dd
.
Command Line Interface