Home And Refresh Commands; Viewing Status; Associated Wireless Clients - SMC Networks EliteConnect SMC2582W-B User Manual

If you click Save, the start page will reflect the fact that the configuration settings have been
changed by showing two buttons—Restart and Cancel. In addition, changes are highlighted in
red. Clicking Cancel discards all the changes. Clicking Restart restarts the SMC2582W-B for the set-
tings to take effect.
Fig. 17. Settings have been changed.

3.1.3. Home and Refresh Commands

Fig. 18. Home and Refresh.
At the bottom of each status page that shows read-only information, there are two buttons—
Home and Refresh. Clicking Home brings you back to the start page. Clicking Refresh updates
the shown status information.

3.2. Viewing Status

3.2.1. Associated Wireless Clients

Fig. 19. Status of associated wireless clients.
On this page, the status information of each associated client (STA or Bridge Slave), including its
MAC address, IP address, user name, number of bytes it has send, number of bytes it has received,
and the time of its last activity, is shown.
23