B.7
Active Client Management Commands
Use these commands to manage Active Clients.
show clients [mac
[sort
(mac | ip | user | machine | port | sessions | idle)]
[reverse]
List active clients.
mac-address
MAC (Ethernet) address to display.
Format: xx:xx:xx:xx:xx:xx
show client mac mac-address [ rights ]
List active sessions for a client. Show client rights if requested.
mac-address
MAC (Ethernet) address to display.
Format: xx:xx:xx:xx:xx:xx
logoff client all | (mac mac-address)
Log off a client or all clients.
mac-address
MAC (Ethernet) address to log off.
Format: xx:xx:xx:xx:xx:xx
B.8
System Configuration and Control Commands
This section describes the set of system configuration and control commands:
Upgrading the System Software
Stopping and Restarting the System
Network Configuration
Access Manager Configuration
Control Server Configuration
Time Configuration
B.8.1
Upgrading the System Software
get upgrade url key [reboot | version]
Retrieve and install a software release. This command starts a background task
B-6
]
mac-address
Command Line Interface