SMC Networks ELITECONNECT SMC2502W User Manual page 220

not allow you to capture any leads, and that's what the conference is all about,
right? To capture the leads, you need attendees to logon at the public access kiosk.
Thus they can't be MAC address users.
So you need to make sure the kiosks are at a different location, and hand out the
rights according to the groups allowed at that location. The problem with the
Wheres we've seen so far is they are based on WLAN Access Manager/port. Since
there are only 40 access points, and 50 public kiosks, you don't have enough access
points to dedicate to the kiosks. So you need to use the Client MAC Address Where.
Let's create one.
Step 1.
First, let's start by opening the Locations Manager, as shown in
46, to create a new location.
Step 2.
Click New Location or click the Locations link to start creating a new
location using the Location Editor, as shown in
C-52
Figure C-46. Locations Manager
Figure C-
Figure C-47.
Rights Tutorial