SMC Networks ELITECONNECT SMC2502W User Manual page 213

Figure C-38. Rights Debugger
Notice Jack gets rights for the 2 subnet, and none of the rest of the internal
network.
This example can be extended for any group of IP addresses, or even for a single
IP address. To make this example, I used all ports, but you could get more
restrictive and only handout specific ports if necessary. Also, in your particular
network, you might want to use group names like Accounting or Engineering,
instead of 192.168.1 or 192.168.2.
The Users Manager screen, as shown in Figure C-39, shows Harry and Jack, and
the groups to which they belong. Note that similar to the User Editor, they can only
be a member of a normal group, so Logon, Guest and User groups are not displayed.
EliteConnect WLAN Security System User Manual C-45