location defaults to an SMC FTP server site where upgrade images are
stored.
Step 3.
Type your Key.
The key is a password that enables you to use this version, which you get
from Technical Support.
Step 4.
To reboot the system automatically and immediately after downloading,
check the box that says Immediately Reboot with update when finished
downloading.
Step 5.
Enable Proxy, if appropriate.
An FTP proxy enables you to download the new image through an
enterprise firewall.
Step 6.
If you enable the proxy, type the IP address of the FTP proxy server and
type the port number of the FTP proxy service (default is 3128), username,
and password.
Step 7.
Click Save Proxy Settings.
It is helpful to save settings if you download new system software
periodically.
Step 8.
Click Download.
The Update Software Process screen appears, as shown in
4-8
Figure 4-10. Entering the Update Software
Figure
4-11.
Controlling the System Functions