Example 2, Allowed User Groups - SMC Networks ELITECONNECT SMC2502W User Manual

<allow>tcp dst port 444 and dst host 42.0.0.1</allow>
<allow>udp dst port 88</allow>
<allow>(tcp dst port 139) or (udp dst port 138) or (udp dst
port
137)</allow>
</allow_filters>
<block_redirects>
</block_redirects>
</client_rights>
Table C-5
Table C-5 Variable Definitions
Variable
@SERVER@
@INTERNAL@
@INTRANET@
@DNS@
This example was fairly straightforward because only one group matched. Things
get a little more complicated when multiple groups match.
Let's create a more complicated situation.
C.5

Example 2, Allowed User Groups

Step 1.
Add a group called Example group 1.
Step 2.
Make it as follows:
•
a Normal group
•
NAT
•
Linger 60 seconds
•
Expire 10000 seconds
•
Allow DHCP
•
DNS redirect
•
HTTP logon redirect
•
HTTPS logon redirect
•
Logon page shortcut Redirect
Follow the procedure in
EliteConnect WLAN Security System User Manual
defines the variables.
Definition
IP Address of the box as typed in on the Network Configuration page
The internal IP address, that is 42.0.0.1
Network as typed in on the Network Configuration page
IP Address of DNS server as typed in on the Network Configuration
page
Configuring the Rights Manager
.
C-17