Network Configuration - SMC Networks ELITECONNECT SMC2502W User Manual

factoryreset
Restores the user configurable data with factory defaults.
B.8.3

Network Configuration

set hostname hostname
Set the system's hostname. The system hostname is also used as the SNMP
system name.
hostname
clear hostname
Clear the system's hostname.
show ip
Show the current IP configuration.
set gateway ip-address
Set the IP address of the default router.
set dhcp
Enable dynamically-assigned IP address configuration for this system. If
disabled the system's IP address, subnet (netmask), gateway, and DNS servers
must be set manually.
set dns ip-address [ip-address]
Set the IP addresses of the DNS servers.
ip-address
clear dns
Clear the IP addresses of the DNS servers.
set sharedsecret [secret secret]
Set the Access Manager or Control Server shared secret. Prompts for the secret
if not entered on the command line.
clear sharedsecret
Clear the Access Manager or Control Server shared secret.
show sharedsecret
Show whether the Access Manager or WLAN Secure Server shared secret is set.
The shared secret is not displayed.
set pptp on | off
This command enables and disables PPTP.
set l2tp on | off
B-8
The hostname must be a fully qualified domain name.
A DNS server IP address for the system. The first IP address is
configured as the primary DNS server and the second is configured
as the secondary DNS server.
Command Line Interface