Enforcing Authentication - SMC Networks ELITECONNECT SMC2502W User Manual

Figure 6-47. User Manager Showing MAC Address Added
Note:
If you wanted to give the MAC address user special rights that the Implicit User group
does not have, add the MAC address user to a particular Normal group. You must allow
that Normal group at the locations that you want those rights to apply.
6.7

Enforcing Authentication

SMC uses the following authentication services:
• Built-in (the default service created by SMC)
• LDAP
• RADIUS
• Kerberos
The Built-in service is available if you choose not use the other authentication
services in place.
Depending on your enterprise network, you might use one or more of these
authentication services, or you might have back-up servers if your primary service
is not available.
To choose your authentication method:
Step 1.
Start with the Rights Manager Screen, as shown in
41, and click Authentication.
6-40
MAC Address Added
Figure 6-48 on page 6-
Configuring the Rights Manager