SMC Networks ELITECONNECT SMC2502W User Manual page 190

Notice that the match groups are the two example groups as expected, but also the
group User. This is because as a user (as opposed to Logon or Guest), we match all
groups specified for the user, as well as all implicit User groups.
Initial Group Expire determines the corresponding expire times for each initial
group. The location is as we told it. The interesting thing is Final Group Expire has
lost the two example groups. This happened because although Fred is a member
of the two example groups, the location did not allow those groups.
So, the rest of the information corresponds to the Allows, Redirects, expire, linger,
and NAT settings for the group User.
In order to get Fred's groups to take effect at the location, we need to specifically
allow those groups at the location specified.
Step 9.
Go to the Location Editor for Everywhere Else and click the groups in the
drop-down list, as shown in
After we allow these groups, let's see what happens in the Rights Debugger.
C-22
Figure C-13.
Figure C-13. Location Editor with Both Groups
Rights Tutorial