Diagnostic Commands - SMC Networks ELITECONNECT SMC2502W User Manual

if not entered on the command line.
clear admin
Remove the console and web admin login and password.
show admin
Show the current console and web admin login. The password is not displayed.
set remote on | off
Enable or disable remote technical support access.
show remote
Display the current remote technical support access setting.
B.4

Diagnostic Commands

Network Connectivity diagnostic commands include:
nslookup hostname
Return the IP address for a hostname.
Translates to:
nslookup –timeout=10 hostname
ping ip-address | hostname
Ping an IP address or a hostname.
Translates to:
ping –c 3 ip-address
or
ping –c 3 hostname
debug ip [interface]
Show IP traffic on an interface. The console session is restarted after the
command is completed.
The available interfaces are:
SMC EliteConnect WLAN Security System User Manual
The interface to watch. The default interface is the
interface
external interface.
The external interface. This interface is sometimes
ext
called the uplink interface. It exists on all system
types.
An internal interface number. These interfaces are
int
sometimes called ports. The WLAN Secure Server
and Access Manager systems have a minimum of
four internal interfaces numbered from 1 to 4, and
more if applicable.
B-3