SMC Networks ELITECONNECT SMC2502W User Manual page 138

Step 3.
Click Show Me. The rights for the user you have selected appear, as
shown in
Step 4.
Click Done when you are finished viewing the rights.
When simulating the rights for an LDAP or RADIUS user, use the Everyone Else
user from the drop-down list. This is an incomplete simulation because the Rights
Debugger does not include the groups supplied by the LDAP or RADIUS system.
Step 5.
For example, display the rights for the user Guest at location Everywhere
Else, as shown in
6-64
Figure 6-75, which shows the rights for the Logon User.
Figure 6-75. Rights for Logon User
Figure 6-76 on page 6-65.
Configuring the Rights Manager