Translates to:
tcpdump –en –i interface ip
debug interface [interface]
Show traffic on an interface. The console session is restarted after the command
is completed.
Translates to:
tcpdump –en -i interface
debug tcpport port [interface]
Show specified TCP port traffic on an interface. The console session is restarted
after the command is completed.
Translates to:
tcpdump –en –i interface tcp
Note:
You must enter Control-C to stop the debug command, which terminates the
command. You must log in again to your console.
traceroute ip-address | hostname [hops [probes [probewait]]]
Displays the
Translates to:
traceroute –n -m hops -q probes -w probewait ip-
address
or
traceroute –n -m hops -q probes -w probewait hostname
B.5
System Status Commands
show status
Display an overview of the system status. For a Control Server, this command
includes up time and the IP address, MAC address and connect time for each
B-4
The interface to watch. The default interface is the
interface
external interface.
The interface to watch. The default interface is the
interface
external interface.
for an IP address or hostname.
traceroute
The maximum number of hops to trace. The default is 5.
hops
The maximum number of probes per hop. The default is 3.
probes
The maximum number of seconds to wait for each probe.
probewait
The default is 2.
port port
Command Line Interface