SMC Networks ELITECONNECT SMC2502W User Manual page 195

If you have multiple WLAN Access Managers and have registered them by
pointing your WLAN Access Manager at the Control Server and they both have
the same shared secret, then you can get to each WLAN Access Manager via the
Managers button of the Control Server. Each WLAN Access Manager's IP address
is a hyperlink to the WLAN Access Manager user interface (UI). In the upper left
corner of each WLAN Access Manager UI is the WLAN Access Manager's MAC
address. You can also create a dummy MAC address by typing in 12 hexidecimal
digits in the MAC address field.
Step 5.
Click Update to return to the Where Editor screen, as shown in
Figure
Step 6.
Name your Where.
Step 7.
Click Update.
This populates the Where list with the Where that was just created.
Step 8.
Select the Where list to specify what Where applies.
Notice that you can create and select multiple Where fields, so a location
could refer to multiple ports on a WLAN Access Manager, or even
multiple WLAN Access Manager, as shown in
EliteConnect WLAN Security System User Manual
C-18).
Figure C-18. Where Editor
Figure C-19.
C-27