Step 3.
Type the User Name.
Step 4.
Select the Group of which this user is a member.
See 6.5.1 Adding a New Group 6-22 if you need to add a new group.
Step 5.
If you use the Built-in authentication service, you might need to type a
password. If you use LDAP, RADIUS, or Kerberos authentication, these
fields are not available.
Step 6.
Click Update.
The User Manager shows the new user, as shown in
6-35.
New User Added
EliteConnect WLAN Security System User Manual
Figure 6-39. Entering a New User in User Editor
Figure 6-40. New User Added in User Manager
Figure 6-40 on page
6-35