SMC Networks ELITECONNECT SMC2502W User Manual page 167

set snmp on | off
Turns SNMP on or off. Turning it on when already on or off when already off
has no effect. By default, this is on.
set snmpport port
Sets the SNMP port.
clear snmpport
Sets the SNMP port to port 161, which is the default.
add snmpmanager hostname | ip-address | ip-address/maskbits
Configures an authorized manager with a hostname, IP address or subnetted IP
address that can receive SNMP responses and traps.
delete snmpmanager all | hostname | ip-address|
ip-address/maskbits
Delete an authorized manager or all of them.
set snmplocation location
Sets the SNMP sysLocation object defined in RFC 1213 as "the physical
location of this node (for example, telephone closet, 3rd floor)."
clear snmplocation
Clears the SNMP location.
set snmpcontact contact
Sets the SNMP
identification of the contact person for this managed node, together with
information on how to contact this person."
clear snmpcontact
Clears the SNMP contact.
set snmpcommunity community
Sets the community name.
clear snmpcommunity
Clears the SNMP community name.
add snmptrapreceiver ip-address
Sets up an IP address to receive traps.
delete snmptrapreceiver all | ip-address
Deletes a trap receiver, or all of them.
show snmp
Shows the current SNMPv1 configuration.
SMC EliteConnect WLAN Security System User Manual
object, defined in RFC 1213 as "the textual
sysContact
B-13