Diagnostic Log Commands - SMC Networks ELITECONNECT SMC2502W User Manual

connected Access Manager. For an Access Manager, this command includes up
time and the IP address and the connect time for its Control Server. For an
Access Manager, this command includes a combination of the Control Server
and Access Manager status.
show ether
Display device Ethernet (MAC) address(es).
show product
Display product name.
show serial
Display product serial number.
show version
Display the software version. Also shows the alternate (upgrade, downgrade or
same) version of the software, if one exists on the system.
B.6

Diagnostic Log Commands

show logs [severity] [max lines] [for count time-units]
[reverse]
Display entries in the error log.
clear logs
Clear the error log.
SMC EliteConnect WLAN Security System User Manual
severity
crit
err
warn
notice
info
the maximum number of lines displayed. The default is 23.
lines
seconds, minutes, hours, days, weeks and months (31 days);
time-unit
the default is one day.
reverses the order of the display, which is normally the most
reverse
recent events first.
critical log entries
error and critical log entries
warning, error and critical log entries
notice, warning, error, and critical log entries
information, notice, warning, error, and critical
log entries
B-5