Configuration; Configuration Overview; Physical Location And Corresponding Software Address - Danfoss iC7 Series Operating Manual

Functional Extension Options
Operating Guide

3 Configuration

3.1 Configuration Overview

The parameters related to functional extensions are in parameter group 9, called I/O. Parameters are dependent on the mounting,
and will appear in the parameter menu after the functional extension has been mounted and wired.

3.2 Physical Location and Corresponding Software Address

Functional extension options are positioned in the physical slots A, B, C, D, or E, depending on the drive frame as shown in
tion 1. When referred to in the software, the option uses a different name for the software address. The 1st slot position with an
installed option is always addressed as 2.01, the 2nd position as 2.02, and so on, regardless of which option slot the 1st option is
installed in.
Table 2: Physical Option Slot and Its Software Address
Slots
A
C
AB
AC
CD
ABC
ACD
CDE
ACDE
Danfoss A/S © 2023.06
2.01
A (2.01)
C (2.01)
A (2.01) B (2.02)
A (2.01) C (2.02)
C (2.01) D (2.02)
A (2.01) B (2.02)
A (2.01) C (2.02)
C (2.01) D (2.02)
A (2.01) C (2.02)
Software address
2.02 2.03
–
–
C (2.03)
D (2.03)
E (2.03)
D (2.03)
Configuration
2.04
– –
– –
– –
– –
– –
–
–
–
E (2.04)
AQ390830267692en-000601 / 136R0273 | 7
Illustra-