iC7 Series Modbus
Operating Guide
3.4 Setting Permissions
Permissions can be set either in the Permissions column in the mapping view, or in the Permissions view in MyDrive
1.
In MyDrive
Insight, go to Customization → Live → MODBUS → Permissions.
®
2.
Set the Read/Write permission for coils and registers:
-
By using the Permissions column in the mapping view.
-
By using the Permissions view in MyDrive
-
The default selection ALL is overwritten by the individual settings for each coil, or register. If the permission is not set for a
specific coil, or register, the selection ALL is predominant.
3.5 Saving Modbus Configuration to a Device
After the Modbus mapping is finalized, the configuration can be saved as a new project or added to an existing MyDrive
project.
1.
To save a configuration, click the Save icon.
2.
To deploy the configuration directly into a device, click the Download icon to create and save an export package (*.vpkg).
3.
After exporting the configuration, update and power-cycle the device with the exported software package.
Package name (Default: Fully Qualified Domain Name)
Package version (Default: 1.0.0)
26 | Danfoss A/S © 2023.09
Insight.
®
N O T I C E
Modbus Data Mapping
Insight.
®
Insight
®
###
###
AQ456329149698en-000101 / 136R0334