Danfoss iC7 Series Operating Manual page 30

Functional Extension Options
Operating Guide
17
15
9
7
3
5
2
1
18
16
14
12
10
8
6
4
13
11
Illustration 17: EnDat and Incremental (TTL or HTL) Encoder
1 Incremental encoder
2 External power supply
5.5.12 HIPERFACE®
This example shows the connection of a dual-channel HIPERFACE® with data channel on D, and SinCos channel on A and B.
Table 19: Parameters for HIPERFACE®
Parameter
9.4.1 Interface Configuration
9.4.4 Encoder Supply Voltage
9.6.1 Singleturn Resolution
9.6.2 Multiturn Resolution
9.6.6 Hiperface Baud Rate
9.6.7 Hiperface Parity
30 | Danfoss A/S © 2023.06
A+
A–
B+
B–
Setting
Select [25] Hiperface.
Set the appropriate voltage.
Set the number of bits used for 1 revolution of the connected HIPERFACE® encoder.
Set the number of bits used for counting the revolutions of the connected HIPERFACE® encoder.
Select the appropriate baud rate.
Select the appropriate parity.
2
1
3 EnDat absolute encoder
Encoder/Resolver Installation and
Configuration
3
Clock+
Clock–
Data+
Data–
AQ390830267692en-000601 / 136R0273