Pv Configuratiion; Pv Nominal Values; Nominal Ratings; Nominal Current - Deif ASC-4 Commissioning Manuallines

11. PV configuratiion

11.1 PV nominal values

In the section "Power source data", all AC values were collected. Now they can be entered into the ASC.

11.1.1 Nominal ratings

Use the values collected in the Power source data chapter to adjust the nominal rating parameter values.
Menu Function
Adjust the rating of the installed PV
6002
panels.
6005 Adjust the Q rating of the inverter
6006 Adjust the S rating of the inverters.

11.1.2 Nominal current

The voltage and current measurements need to be connected and set up in the menus.
COMMISSIONING GUIDELINES 4189341077D EN
Comments
For example, 200 modules with a 250 Wp rating are installed. Set the value in
this menu to 200 × 250 × 0.001 = 50 kW.
If given. Otherwise, set to the same value as 6006.
For example, three 20 kVA inverters are installed. Set this menu to 3 × 20 = 60
kVA.
Page 28 of 58