Logging Settings; Logging External Server Port; Logging Internal Mode; Logging Mode - Cisco TelePresence SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set

Introduction

Logging settings

Logging External Mode

Determine whether or not to store the system logs on a remote syslog server. This setting
has no effect if the Logging Mode setting is set to Off.
You must enter the address of the remote server in the Logging External Server Address
setting. Unless otherwise specified in the Logging External Server Port setting, the standard
syslog port is used.
Requires user role: ADMIN
Default value: Off
Value space: Off/On
Off: System logs will not be stored on the remote syslog server.
On: System logs will be stored on the remote syslog server.

Logging External Protocol

Determine which protocol to use toward the remote logging server. You can use either the
syslog protocol over TLS (Transport Layer Security), or the syslog protocol in plaintext. For
details about the syslog protocol, see RFC 5424.
Requires user role: ADMIN
Default value: SyslogTLS
Value space: Syslog/SyslogTLS
Syslog: Syslog protocol in plain text.
SyslogTLS: Syslog protocol over TLS.

Logging External Server Address

The address of the remote syslog server.
Requires user role: ADMIN
Default value: ""
Value space: String (0, 255)
A valid IPv4 address, IPv6 address or DNS name.
D15330.14 SX10 Administrator Guide CE9.7, APRIL 2019.
Configuration Peripherals Maintenance

Logging External Server Port

The port that the remote syslog server listens for messages on. If set to 0, the video system
will use the standard syslog port. The standard syslog port is 514 for syslog, and 6514 for
syslog over TLS.
Requires user role: ADMIN
Default value: 514
Value space: Integer (0..65535)
The number of the port that the remote syslog server is using. 0 means that the video
system uses the standard syslog port.

Logging Internal Mode

Determine whether or not to store the system logs on the video system (local files). These
are the files that you get when you download the log bundles from the video system. This
setting has no effect if the Logging Mode setting is set to Off.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: System logs will not be stored on the video system.
On: System logs will be stored on the video system.

Logging Mode

Define the logging mode for the video system (syslog service). When disabled, the syslog
service does not start, and most of the systema and audit logs are not generated. The
Historical Logs and Call Logs are not affected.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: Disable the system logging service.
On: Enable the system logging service.
www.cisco.com — Copyright © 2019 Cisco Systems, Inc. All rights reserved.
109
Administrator Guide
System settings System settings Appendices