Hyundai 35DS-7 Operation Manual page 98

5. WET DISK BRAKE
1)
STRUCTURE
1 Spindle
2 Steel plate
3 Disk plate
4 Parking piston
2) OPERATION
Sealed up structure of hydraulic disk brake system secures good brake performance even in the high
humid or dusty area.
Because it is possible to use the brake semi-permanently, there is no need to replace or change the
lining as drum type brake do.
Parking brake's lever system is the serration type, so it is possible to adjust the play.
Because it is easy to maintain the gap of both brakes, high brake efficiency and minimum disproportional
braking deviation is acquired.
Major components are 3 disk plates(3), 4 steel plates(2), service piston(4), parking piston(5), parking
lever(9) and brake housing(11).
Braking force is applied by restricting the driving force from drive shaft(8) and spline collar(7).
11
1 2 3
5 Service piston
6 Parking piston fixing bolt
7 Spline collar
8 Drive shaft
4-4
10 9
4 5 6
9
10 Parking lever shaft
11 Brake housing
8
7
D357TA10
Parking lever