Hyundai 35DS-7 Operation Manual page 77

4) Remove plug(11), O-ring, spring(12) and
ball(13) from cover.
5) Remove nipple(14) from the housing.
6) Remove plug(15), O-ring, spring(16) and
valve(17).
7) Remove plug(18).
Bearing cup(19) and shim(20) are
located in the cover or at the shaft in the
transmission case.
Mark the location of the bearing cup(19)
and shim(20) on the transmission cover
or shaft in the transmission case.
8) Loosen 5 bolts of stator hub(22) fixed at
bearing plate(20) and remove stator hub(22)
from bearing plate(20).
Use plastic hammer in order not to damage
stator hub.
18
19
21
3-35
16
17
15
14
12 11
13
D357TM04
20
D357TM05
22
D357TM06