Hyundai 35DS-7 Operation Manual page 78

9) Remove 4 socket bolts(23) from the bearing
plate(14) and disassemble flange pump(24).
Remove 1 socket bolt(25) and 4 socket
bolts(26) from the flange pump to remove
charging pump(27) and pump gasket(27)
and then disassemble gear P.T.O output(29)
and ball bearing.
Remove elbow(30).
10) Loosen 2 socket bolts from charging
pump(27) and then remove pump case and
pump cover.
11) Remove 2 thrust washers(31), needle
bearing(32) and gear P.T.O idle(33)
individually from the bearing plate(14).
12) Remove 2 bolts(35) and 9 bolts(36) and
then disassemble control valve gasket(34).
30
24
29
14
32
31
36
3-36
23
31
28
33
31
26
25
27
D357TM07
D357TM08
D357TM09
35
34
D357TM10