Locate driving gear(4) and driven gear(5)
while keeping the gears straight.
Locate pressure plate(4+21+15) with
care for the direction.
Open rear cover(2) to locate hub(24) into
rear section.
Tighten the bolts(10) with washer(14) in
a crisscross pattern to torque value of
4.6kgf.m(33.3lbf.ft).
Check that the pump rotate freely when
the drive shaft is turned by hand. If not a
thrust plate seal may be pinched.
1
Front section
Rear section
2
Rear section
14
10
6-30
21
15
4
5
D357PMP18
24
D357PMP19
2
Front section
D357PMP20