Hyundai 35DS-7 Operation Manual page 135

(29) Place the end cover in position.
(30) Fit the special screw with washer and
place it in the hole shown.
(31) Fit the six screws with washers and insert
them. Cross-tighten all the screws and
the rolled pin.
Tightening torque : 4.0
(32) Place the dust seal ring in the housing.
0.5kgf m
(28.9 3.6lbf ft)
5-28
5-84(1)
5-84(2)
5-84(3)
5-84(4)