Hyundai 35DS-7 Operation Manual page 90

28) After adhering valve gasket(34), assemble
valve plate with 9 bolts(35) and 2 bolts(36).
Tightening torque (35) : 1.4kgf m
Tightening torque (36) : 2.8kgf m
29) T/M control valve assembly
Adhere valve gasket on the control valve
body.
Assemble plug(23) on the both sides.
After assembling spring(9) and plug(7)
and then install piston(10), O-ring(13,
27), filter(12) and plug(11).
Assemble plug(21), spool(14), spring
(28,15,16), oil seal(20) and plunger(17).
Assemble pin(18) and stop bolt(19).
Assemble spool(2), spring(3)and plug(4).
30) Assemble 2 thrust wasers(31), needle
bearing(32), Gear-P.T.O Idle(33) to the
bearing plate(14) individually.
Charging pump assembly
31) Assemble pump case and pump cover with
2 socket bolts (29-1).
Tightening torque (29-1) : 0.48~0.55
(10.1
lbf ft)
(20.3
lbf ft)
kgf m
(3.5~4.0 )
lbf ft
3-48
35
33
31 32
29-1
36
D357TM10
D357TM11
31
D357TM42
D357TM43