Hyundai 35DS-7 Operation Manual page 63

(8) Remove snap ring(12) and then remove
sun gear(10) from the shaft(11).
(9) After removing bolt(13), remove ring
gear(14) and torque plate assembly from
the axle tube.
(10) Remove snap ring from the ring gear(14)
and disassemble internal gear carrier.
(11) Remove bearing cup from the wheel hub
by using jig and hammer. Shaft seal will be
damaged.
11
14
3-21
10
12
D357DA08
13
D357DA09
D357DA10
D357DA11