Hyundai 35DS-7 Operation Manual page 66

(10) Remove lock nut(9).
(11) Remove drive bevel pinion shaft (10) by
using a plastic hammer.
Be careful not to damage bevel pinion
shaft.
(12) Remove shim(11) and spacer(12) from
pinion shaft.
Using a bearing puller, disassemble inner
race of taper roller bearing from the pinion
shaft.
(13) Remove outer race of taper roller bearing
and shim from the housing by using a jig
and hammer.
Do not reuse damaged shims.
(14) Remove outer race of taper roller bearing
from the opposite side.
10
12
3-24
9
D357DA19
11
D357DA20
D357DA21
D357DA22