Hyundai 35DS-7 Operation Manual page 65

(5) Disassemble bearing(6) from the
differential housing and remove 12 bolts
(7).
(6) Remove differential assembly from the
carrier.
(7) After removing 12 mounting bolts(8) from
the housing and then disassemble ring
gear.
(8) Check the mark on the housing and
separate the housing from the differential.
If there is no mark, be sure to mark on the
housing.
When reassembling, it must be placed at
the same position as before.
(9) Remove thrust washer, side gear, pinion
gear and spider and then place them on
the clean bench.
3-23
6
7
D357DA15
8
D357DA16
D357DA17
D357DA18