Hyundai 35DS-7 Operation Manual page 132

(17) Press and turn the lip seal into place in the
housing.
(18) With a light turning movement, guide the
spool and sleeve into the bore.
Fit the spool set holding the cross pin
horizontal.
(19) The spool set will push out the assembly
tool guide. The O-ring are now in position.
(20) Turn the steering unit until the bore is
vertical again. Put the check valve ball
into the hole indicated by the arrow.
5-25
5-81(1)
5-81(2)
5-81(3)
5-81(4)