Hyundai 35DS-7 Operation Manual page 29

While supporting lift chains, remove nuts
from the anchor bolt.
Pull the chains out of the sheaves and
drape them over the front of the carriage.
Slowly raise inner mast upright until mast
clears top of fork carriage. Move carriage
to work area and lower the mast.
Make sure that carriage remains on
floor and does not bind while mast is
being raised.
Inspect all parts for wear or damage.
Replace all worn or damaged parts.
Anchor
bolt
Nut
Mast
Carriage
Lift chain
Lift chain
2-3
Chain
Outer
mast
Block
Mast
Block
Carriage
D357RE54
D357RE55
D357RE56