Hyundai 35DS-7 Operation Manual page 35

(5) Inching linkage
Remove bolt fixing the linkage assembly
to T/M control valve.
(6) Transmission cooling piping
Disconnect cooling hose and connector
from the transmission.
Make sure that the coolant be drained
from the hose.
(7) Torque converter
Remove the cover on top face of the
torque converter housing then remove
the 4 mounting bolts installed on the
engine flywheel. To rotate the flywheel,
remove 1 mounting bolt, then insert a
turning tool in the mounting hole. One
man must turn the engine fan by hand
while the other turns the flywheel.
(8) Mounting bolts holding to flywheel
housing
Remove the transmission assembly from
the torque converter housing by loosen-
ing the mounting bolts.
Remove torque converter housing from
the engine flywheel by loosening the
mounting bolts and pins.
Bolt
T/M
control
valve
T/M cooling hose
Transmission
assy
Bolt
T/M
Drive
axle
Torque
converter
T/M
Drive
axle
2-9
Inching pedal
Radiator
assy
Cover
Torque
converter
Pin
Bolt
D357RE09
D357RE10
D357RE11
D503RE12