Hyundai 35DS-7 Operation Manual page 82

22) Remove clutch pressure plate, 7 clutch
disks and 7 clutch plates(51) from the
cylinder.
23) Pressing the retainer(52) downward and
then remove snap ring(53) with a driver
while reducing the tension of spring
assembly.
24) Remove retainer(52) and spring assembly
from the cylinder.
25) Remove piston(54) using pressurized air
and remove O-ring from the shaft.
26) Remove seal ring from low speed forward
clutch.
Remove 3 seal rings(55), bearing(56), thrust
washer(57) and gear(58).
Remove needle bearing and spacer.
52
53
3-40
51
D357TM19
54
D357TM20
55
56
57
58
D357TM211