Insert the steel bushing(26) into
body(27).
Insert the complete pressure plate
(5+16+22) into body(27) while keeping
the plate straight.
Seal side should face to the rear side,
opposite side of gears.
Pay attention to the direction of seal.
(opened side should face suction side
always)
Locate driving gear(8) and driven gear(9)
while keeping the gears straight.
Locate pressure plate(5+16+22) with
care for the direction.
Locate complete cover(3+19+20) while
taking care not to give any damage on
the shaft seal by edge of shaft.
And tap around the cover(3) with rubber
mallet.
27
27
27
27
6-28
26
D357PMP10
22
5
16
D357PMP11
8
9
D357PMP12
8
19
3
D357PMP13
20