Steering Wheel Installation - Club Car Carryall 550 2015 Maintenance And Service Manual

7
Steering Wheel
2862
Figure 7-1 Steering Wheel

STEERING WHEEL INSTALLATION

NOTE: To minimize corrosion and to make future removal of the steering wheel easier, apply a small amount of oil or
anti-seize compound to steering shaft splines and taper before installing the steering wheel.
1. Install the steering wheel (3) on the splines of the steering shaft (4). Be sure to align the match marks placed on
the wheel and steering column shaft in step 3 above (Figure 7-1, Page 7-2).
2. Install the steering wheel nut (5) and tighten to 156 in·lb (17.6 N·m).
3. Install the plate (2) and screws (1) (Figure 7-1, Page 7-2). Tighten screws to 16 in·lb (1.8 N·m).
4. Connect the battery cables. See Connecting the Battery – Gasoline Vehicles, Section 1, Page 1-4. See
Connecting the Batteries – Electric Vehicles, Section 1, Page 1-4.
Page 7-2 2015 Carryall 550 Maintenance and Service Manual
1
1500-18300-10253
Figure 7-2 Steering Wheel Puller
STEERING AND FRONT SUSPENSION