Disabling The Vehicle; Disconnecting The Batteries - Electric Vehicles; Connecting The Batteries - Electric Vehicles; Disconnecting The Battery - Gasoline Vehicles - Club Car Carryall 550 2015 Maintenance And Service Manual

Gasoline vehicle with subaru ex40 engine electric vehicle with quiq charger
Table of Contents

Advertisement

1
General Warnings

DISABLING THE VEHICLE

1.
Engage park brake to lock wheels.
2.
Turn the key switch OFF and remove the key.
3.
Place the Forward/Reverse control in the NEUTRAL position.
4.
In addition, chock the wheels if servicing or repairing the vehicle.
DISCONNECTING THE BATTERIES – ELECTRIC VEHICLES
1.
Disable the vehicle. See Disabling the Vehicle on page 1-4.
2.
Place Tow/Run switch in the TOW position before disconnecting or connecting the batteries. Failure to heed
this warning can result in a battery explosion or severe personal injury.
3.
Disconnect the batteries, negative (–) cable first, as shown (Figure 1-1).
4.
After disconnecting the batteries, wait 90 seconds for the controller capacitors to discharge.
CONNECTING THE BATTERIES – ELECTRIC VEHICLES
1.
Ensure the Tow/Run switch is in the TOW position.
2.
Connect the battery cables, positive (+) cable first.
3.
Tighten battery terminals to 110 in·lb (12.4 N·m).
4.
Coat terminals with Battery Terminal Protector Spray to minimize corrosion.
DISCONNECTING THE BATTERY – GASOLINE VEHICLES
1.
Disable the vehicle. See Disabling the Vehicle on page 1-4.
2.
Disconnect the battery cables, negative (–) cable first, as shown (Figure 1-2).
3.
Disconnect the spark plug wire from the spark plug.
CONNECTING THE BATTERY – GASOLINE VEHICLES
1.
Connect the battery cables, positive (+) cable first.
2.
Tighten battery terminals to 80 in·lb (9 N·m).
3.
Coat terminals with Battery Terminal Protector Spray (CC PN 1014305) to minimize corrosion.
4.
Connect the spark plug wire to the spark plug.
Page 1-4
2015 Carryall 550 Maintenance and Service Manual
SAFETY

Advertisement

Table of Contents
loading

Table of Contents