Snubber; Snubber Removal; Snubber Installation - Club Car Carryall 550 2015 Maintenance And Service Manual

22

Snubber

SNUBBER
See General Warnings on page 1-1.
NOTE: The snubber is installed on the gasoline vehicle only.

SNUBBER REMOVAL

1. Support the powertrain with a floor jack under the engine pan (1) so that the snubber (2) is raised slightly and
does not rest on the vehicle frame (Figure 22-14, Page 22-14).
2. Remove the two bolts (3) and two lock nuts (4) securing the snubber bracket (5) to the engine pan (1).
3. Slide snubber (2) and bracket (5) assembly toward battery to remove it from vehicle.
4. Slide snubber (2) off bracket (5).

SNUBBER INSTALLATION

1. Slide snubber (2) onto bracket (5) (Figure 22-14, Page 22-14).
2. Install bracket and snubber assembly onto engine pan (1).
3. Tighten lock nuts (4) from 20 to 25 ft·lb (27.1 to 33.9 N·m).
1
3039
Figure 22-14 Snubber
Page 22-14 2015 Carryall 550 Maintenance and Service Manual
Utility/T ransportation
Orientation
5
OR
2
Precedent
Orientation
ENGINE (SUBARU EX40)