ELECTRICAL COMPONENTS: IQ PLUS ELECTRIC
VEHICLES
CHARGE INDICATOR LIGHT
See General Warnings on page 1-1.
TESTING THE CHARGE INDICATOR LIGHT
See Test Procedure 18 – Charge Indicator Light on page 12-41.
CHARGE INDICATOR LIGHT REMOVAL
1.
Disconnect the batteries and discharge the controller. See Disconnecting the Batteries – Electric Vehicles,
Section 1, Page 1-4.
2.
Remove instrument panel. See Instrument Panel Removal on page 4-10.
3.
Disconnect the wires at the warning light.
4.
Press the two retaining tabs and remove the light from the instrument panel.
CHARGE INDICATOR LIGHT INSTALLATION
1.
Install light into instrument panel.
2.
Connect wires to the warning light.
3.
Install the instrument panel. See Instrument Panel Installation on page 4-10.
4.
Connect the batteries. See Connecting the Batteries – Electric Vehicles, Section 1, Page 1-4.
2015 Carryall 550 Maintenance and Service Manual
Charge Indicator Light
Page 13-11
13