Club Car Carryall 500 2016 Maintenance And Service Manual page 75

ACCELERATOR AND BRAKE PEDAL GROUP
accelerator pedal height closest to the floorboard. Press the accelerator pedal until the end of the tool rests
against the floorboard; pedal height should be 5-5/8 inches (14.3 cm). Use a rubber strap to hold pedal in
position against the floorboard and then tighten nut to 26 ft·lb (35.3 N·m) (Figure 5-27, Page 5-19).
Figure 5-25 Brake Rod Adjustment
1. Accelerator Pedal Adjustment Tool (CC P/N 101871001)
2. Rubber Strap
6. Adjust the brakes. See Brake Adjustment, Section 6, Page 6-6.
7. Connect the battery cables. See Side-Post Battery: Connecting the Battery-Gasoline Vehicles, Section 1,
Page 1-5. See Connecting the Batteries – Electric Vehicles, Section 1, Page 1-4.
1
Figure 5-27 Accelerator Pedal Height Adjustment
2016 Carryall 500 and 700 Maintenance and Service Manual
Pedal Group Adjustment – Electric Vehicles
1
1. 1/2-Inch Socket
2. 1/2-Inch Wrench
Figure 5-26 Accelerator Pedal Height Adjustment
2
5
2
Page 5-19