17
Axle Bearing and Shaft
7.
Inspect the axle shaft assembly to be sure the bearing and collar have not slipped and are still seated against
the shoulder on the axle shaft.
8.
Inspect bearing (5) (Figure 17-5, Page 17-3). If the bearing in a Type G transaxle is worn or damaged, the
entire axle shaft assembly (1 or 2) must be replaced.
2
Figure 17-1 Remove Internal Retaining Ring
A. Adapter Ring Lip
Figure 17-3 Axle Seal and Adapter Ring
Page 17-2
2016 Carryall 500 and 700 Maintenance and Service Manual
1
A
39
15
TRANSAXLE: ELECTRIC VEHICLES
Figure 17-2 Axle Seal and Adapter Ring Removal
Figure 17-4 Axle Seal and Adapter Ring Installation