21
Charging Diode
4.2.
Connect the 10-gauge white wire (5) to the other large solenoid post, along with the red wire (9) from the
voltage regulator and white wire (10) from the starter/generator. Tighten nut (3) to 55 in·lb (6.2 N·m).
5.
Replace the electrical component box cover (2) and screw (1) and tighten the screw to 18 in·lb (2.0 N·m).
6.
Connect battery and spark plug wire(s). See Side-Post Battery: Connecting the Battery-Gasoline Vehicles
on page 1-5.
See Top-Post Battery: Connecting the Battery-Gasoline Vehicles on page 1-5.
Page 21-6
2016 Carryall 500 and 700 Maintenance and Service Manual
ELECTRICAL COMPONENTS: KEY-START
GAS VEHICLE