23
Engine Control Linkages
ENGINE CONTROL LINKAGES
See General Warnings on page 1-1.
DANGER
• To ensure the vehicle does not run over you while you disconnect or adjust the accelerator push
rod, do the following:
– Turn key switch OFF and remove key, place Forward/Reverse handle in the NEUTRAL position,
and chock the wheels prior to servicing the vehicle.
– Disconnect battery cables, negative (–) cable first.
– Disconnect the spark plug wire from the spark plug.
– See Side-Post Battery: Disconnecting the Battery-Gasoline Vehicles on page 1-5.
See Top-Post Battery: Disconnecting the Battery-Gasoline Vehicles on page 1-5.
GENERAL INFORMATION
For proper vehicle operation, it is important the accelerator pedal, governor linkage, and throttle adjustments are done
correctly and in the proper sequence. See following CAUTION.
CAUTION
• Improper adjustment can result in poor vehicle performance and/or damage to the engine components.
3042
Page 23-6
2016 Carryall 500 and 700 Maintenance and Service Manual
Figure 23-3 Engine Control Linkages – EFI vehicles
FUEL SYSTEM: GASOLINE VEHICLES