15
Onboard Charger Removal And Installation
5.
Remove charger from vehicle.
ONBOARD CHARGER INSTALLATION
1.
Install charger onto vehicle.
2.
Install the four lock nuts (5) securing charger to charger mounting plate. Tighten to 40 in·lb (5.4 N·m).
3.
Connect the AC and DC connector.
4.
Connect 8-pin grey connector.
5.
Install wire ties to secure connectors to the charger P-clip.
6.
Connect the batteries. See Connecting the Batteries – Electric Vehicles on page 1-4.
Page 15-12
2016 Carryall 500 and 700 Maintenance and Service Manual
QUIQ HIGH FREQUENCY CHARGER