appear here and reserves the right to make changes without notice. ION is a registered trademark of Power Measurement Ltd. All other trademarks are property of their respective owners. Revision Date: July 19, 2004
9510 and 9610 I/O Card
This document describes how to install, configure, and verify the operation of the
optional Input/Output card ("I/O card"), available for your 9510 / 9610 meter. It
supplements your meter's Installation Guide and User's Guide.
Page 2
Installation and Wiring 9510 and 9610 I/O Card Installation and Wiring ANGER During normal operation of the meter, hazardous voltages are present which can cause severe injury or death. These voltages are present on the terminal strips of the device and throughout the connected potential transformer (PT), current transformer (CT), status input, relay, and control power circuits.
Page 3
9510 and 9610 I/O Card Preparing the Meter for Installation Preparing the Meter for Installation The following steps should be taken before inserting an I/O card into an 9510 / 9610 meter: AUTION The components inside the meter are extremely sensitive to electrostatic discharge. Wear an anti-static wrist strap at all times when working inside the unit.
Page 4
Connecting to the I/O Card 9510 and 9610 I/O Card Connecting to the I/O Card See the 9510 / 9610 Installation Guide for detailed instructions. Verifying Operation Checking Status on Front Panel The 9510 / 9610 meter’s onboard status inputs and digital outputs can be monitored using the D Inputs and D-Output softkey items.