Configuring Custom Modbus Data Using Ion Setup - Siemens 9810 Series User Manual

Communications
Data Mapping module
Data Mapping Egy Modules
Data Mapping EN Modules
Data Mapping EN Prev Modules
Data Mapping I/O Modules
Data Mapping Meas Modules
Data Mapping PQ Modules
Data Mapping Stats Modules
Data Mapping TOU Modules
You can add extra Modbus information or duplicate information that is already in the fixed map to
different Modbus registers using Modbus Slave modules.
See ION Reference, available from www.usa.siemens.com/pds, for detailed information about
Data Mapping modules and Modbus Slave modules.

Configuring custom Modbus data using ION Setup

You can add custom data to your meter's default Modbus map, completely customize your
meter's Modbus map, or revert your meter's Modbus map back to its default configuration using
ION Setup.
Download your meter's Modbus map information from www.usa.siemens.com/pds.
To configure custom data using ION Setup:
1. Start ION Setup.
2. Open the Setup Assistant for your meter.
3. Click Communications > 3rd party protocols > Modbus Slave.
The name of the meter's current Modbus map is displayed, along with the quantity of custom
registers and their start and end addresses.
100
Description
Maps kWh, kVAh and kVARh delivered and received
data, including conditional, quadrant and incremental
energies.
Maps present interval EN 50160 power quality
compliance data.
Maps previous interval EN 50160 power quality
compliance data.
Maps input metering data, alarms, resets and reset
counts.
Maps measured data from the standard and high-speed
Power Meter module.
The Cfg Modbus Map Enable setup register may exist in
this module.
Maps power quality data such as Crest Factor, K Factor
and total harmonic distortion, including IEC 61000-4-30
power quality compliance data.
Maps statistical low, mean and high data values, such as
I a mean (phase A current average value).
Maps time-of-use (TOU) data, such as seasons, rates,
and per-season demand such as kW sd rec A (sliding
demand kilowatts received in season A).
9410 series - User manual
7EN05-0336-09