Siemens 9810 Series User Manual page 48

Cybersecurity
Security capability
User credentials and
password robustness
User account lockouts and
timeouts
User privileges
Webpages
Configuration
Cybersecurity event logs
and reports
User access (Advanced security mode only)
The following table lists the Advanced security mode user access details:
Time Sync Access
Read Access
Peak Demand Reset
Access
Comm Config Access
Test Mode Access
Full Meter Config Access
Security Config Access
User accounts (Advanced security mode only)
The following table lists the Advanced security mode user account details:
48
Use a single account to access the meter with a numeric password
for login.
Use multiple user accounts with alphanumeric passwords for login
and configuration changes.
Password range and limit: Any combination of letters and
numbers, up to 16 characters.
Password strength feedback using ION Setup.
Define user account lockout criteria after unsuccessful login
attempts and define event timeout period.
User accounts with variable permissions to read access or
configuration privileges.
Disable or enable webpages for viewing meter data online using a
web browser (Web Server).
Disable or enable ability to configure the meter using:
• Modbus communications programming or allow read-only
• The display
• Meter webpages (Web Server programming).
Disable and enable time synchronization.
Password required for broadcast time synchronization
configuration changes using the display or communication
protocols.
Set up cybersecurity event logs and alarms using event priorities.
Access type
Set the meter's time and time synchronization parameters.
View parameters, except security configuration.
Reset peak demand values.
Configure communication settings.
Switch the meter to test mode, if available with your meter type.
Configure meter settings.
Configure security settings.
Description
viewing.
Permission
9410 series - User manual
7EN05-0336-09