Resetting The Meter Using Ion Setup - Siemens 9810 Series User Manual

9410 series - User manual
Reset
Master Reset
Peak Demand Reset
Min/Max Reset
Digital Input Count Reset
Harmonics Min/Max Reset
Disturbance Count Reset
EN50160 Reset
Option Modules Reset
Conditional (Cnd) Energy
Reset
Input Metering Reset

Resetting the meter using ION Setup

You can reset the meter using ION Setup.
Revenue-locked meters must be unlocked to perform resets that impact revenue data.
Meter resets clear the meter's onboard data logs and other related information.
DATA LOSS
Failure to follow these instructions can result in data loss.
Ensure all important data from the device is saved before performing a reset.
7EN05-0336-09
Description
• Clears all cumulative and derived quantities from the meter,
including: demand, peak demand, energy, and revenue
parameters.
• Clears meter event and waveform logs.
• Clears COMTRADE waveform records stored in the meter's
internal SFTP site.
• Clears meter data logs.
Clears meter peak demand values.
NOTE: The peak demand reset has a lockout period that sets the
minimum time allowed between consecutive resets.
Clears maximum and minimum values stored in the meter.
Clears the digital input status change counters.
Clears maximum and minimum harmonics values stored in the
meter.
Clears the sag/swell event counter. The sag/swell event counter
counts the number of sag/swells that have occurred since since
the last reset or meter power-up.
Clears all EN 50160 parameters and statistics accumulated in the
meter.
Resets communications to expansion modules connected to the
meter.
Clears the conditional energy values stored in the meter.
Clears the input metering values stored in the meter.
NOTICE
Resets
243