Table of Contents
Advertisement
9410 series - User manual
3. Click Delete custom certificate.
The meter prompts that you will be logged out and that a self-signed certificate will be used.
4. Click OK to proceed.
Secure File Transfer Protocol (SFTP)
Your meter has an internal SSH (Secure Shell) server that can be accessed using an encrypted
connection with SFTP (Secure File Transfer Protocol) client software. The SSH server hosts an
internal SFTP site and stores files in the meter's flash memory, such as webpages, COMTRADE
records and firmware files.
Transferring files using SFTP
Prerequisites:
• Your meter's IP address.
• SFTP port number.
• SFTP client software, such as FileZilla or WinSCP.
To transfer files using SFTP:
1. Start the SFTP client software.
2. Navigate to the desired folder > select file(s) for upload.
3. Close the SFTP client software to disconnect from the meter.
Free up flash memory
Error messages related to available site space for storing files can be resolved by deleting files
using an SFTP client application. Available site space is affected by the number and size of stored
files and by features that use flash memory, such as increasing the number of COMTRADE
waveform records.
SFTP folders and file permissions
SFTP folder structure:
Folder
COMTRADE_1 to
COMTRADE_3
documents
IEC61850
optionModuleUpg and
rmdUpg
7EN05-0336-09
Description
View COMTRADE files from these folders. Users have read
permission of files.
Add any file type to this folder. Users have full control of files.
Add an IEC 61850 configuration (CID) file to this folder to activate
IEC 61850 functionality. Users have full control of files in the root
and read permission of files in the log folder.
Upload firmware upgrade files for your meter's display or option
modules to these folders. Users have full control of files.
Communications
109
Advertisement
Table of Contents
Troubleshooting
